Stucco resurfacing for tired elevations.
When a wall has collected a decade of mismatched patches, one consistent finish across the whole elevation costs less than another round of spot repairs.
When patching stops making sense
Every patch is a slightly different texture and a slightly different age of material. One or two disappear. Six of them, done by four different people over fifteen years, turn an elevation into a map of its own history, and no amount of paint hides the texture differences in low afternoon sun.
At that point the arithmetic changes. Another spot repair is cheap on its own but adds to the patchwork, while resurfacing brings the whole face to one finish and gives you an elevation that looks intentional again.
We will tell you which side of that line your wall is on. If two clean patches will genuinely do the job, that is what we will quote.
- Multiple mismatched patches across one elevation
- Widespread hairline crazing on an aging finish
- A texture you have never liked and want changed
- Preparing a tired exterior for sale
The base coat has to be sound
Resurfacing puts a new finish coat over existing stucco. That only works if what is underneath is bonded and solid, so the first job is sounding the whole elevation and dealing with anything hollow.
Detached areas get cut out and rebuilt as a normal repair before any resurfacing happens. Skipping that step is the classic way this work goes wrong: the new finish looks beautiful for a year and then cracks in exactly the outline of the failure that was covered over.
Any active water problem gets handled at the same point, for the same reason. A new surface over a wall that is still getting soaked is a countdown, not a repair.
Choosing the finish
Resurfacing is the one moment when changing the look of the house is cheap, because the applicator is already on site and the whole elevation is in play. Knockdown is the most common choice in Southwest Florida and hides minor imperfection well. Sand and smooth finishes read as more contemporary and are less forgiving of a wall that is not flat. Dash is heavier and more traditional.
The main practical consideration is consistency with the rest of the house. Resurfacing one elevation in a different texture from the other three creates a new mismatch instead of solving the old one, so if you want a texture change we would generally suggest planning it across the whole exterior even if the work happens in stages.
We will show you the options and give you our honest view of what will look right on your house rather than what is quickest to apply.
- Knockdown, sand, smooth and dash finishes
- Texture kept consistent with the rest of the house
- Staged across elevations where budget requires
- Honest advice on what suits the building
Timeline, weather and cost
Resurfacing is weather-dependent work. Coats need to go on and cure without a downpour landing on them, which in a Southwest Florida summer means watching the forecast and sometimes moving a day. We would rather reschedule than apply a coat we know the afternoon storm is going to ruin.
Cost sits between spot repair and re-stuccoing from scratch, and the price depends on elevation size, how much preliminary repair the base needs, and which finish you choose. You get it in writing after we have sounded the wall, not from a photograph.
There is no deposit, nothing is due until the work is complete and you are satisfied, and our workmanship is backed by a lifetime guarantee. Bring us another contractor's written quote for the same scope and we will beat it.
Simple from estimate to guarantee.
Free Estimate
We inspect your roofline, recommend the right fix, and hand you a clear written price — no obligation.
Scheduled Service
Our local crew completes the work cleanly and on time, and hauls away anything we remove.
Lifetime Guarantee
Backed by our workmanship guarantee, and you pay nothing until the job is done right.
Stucco Resurfacing questions.
Repair fixes specific damaged areas and matches the patch to the surrounding wall. Resurfacing applies a new finish coat across a whole elevation so everything reads as one consistent surface, which is the better answer once a wall has collected several mismatched patches.
Yes, provided what is underneath is bonded and sound. We sound the whole elevation first and repair any hollow areas before resurfacing. Applying a finish coat over detached stucco just means the failure reappears through the new surface.
Resurfacing is the natural time to do it, since the whole elevation is in play. The thing to think about is consistency, because a new texture on one wall and the old texture on the other three creates a fresh mismatch. We usually suggest planning it across the house even if the work is staged.
It depends on elevation size and how much repair the base needs first, and it is weather-dependent. Coats have to cure without rain landing on them, so a Southwest Florida summer schedule sometimes shifts a day. We would rather move than apply a coat a storm will ruin.
Considerably, because the existing base coat stays. A full re-stucco means taking the wall back and building up from scratch. Resurfacing is the middle path between that and spot patching.
In most cases yes, and it is worth budgeting for. A fresh, consistent surface across the elevation takes paint evenly, which is what gives you the finished look the resurfacing was for.
Contact Us
(239) 342-5489Or, fill out this handy form and we'll get back to you as soon as possible – usually within 24 hours on business days.